Flow Meters - Products - Mega Marketing International Link

	Flow Meters
		LD Electromagnetic Flowmeters LDG Series electromagnetic flowmeters, composed of LDG sensor and LDZ converter, are designed for the linear flow measurement of process liquid products that must be electrically conductive. Integral System: sensor and converter form a single unit and are solidly connected. Remote System: sensor and converter are remote units and electrically connected by signal and field cables. Cable length upto 30.

		YF100 Vortex Flow meter Series of vortices will be shed alternatively from both sides of the shedder (that is a cylindrical or triangular bar) when it is inserted in the fluids. Under certain conditions, the frequency of shed vortices should be proportional to volume flow rate. Based on this principle, the flow measurement could be carried out through measuring frequency of vortices by means of vortex flow-meters. Two versions are available: one has a built-in (integral) converter, and the other is used with a remote converter.

		Flow Indicator XSJ-39A Series digital flow totalizer is typical of new type instrument using single microcomputer chip as its core.It can be combined with such flow-meter as turbine, vortex, rotary piston, and roots et-cetera which is capable of generating electric pulse signals and standard direct current signals, thus carrying out remote display and control without compensations.

		LWGY Turbine Flow Meter LWGY Turbine Flow Transducer (called "Transducer" for short below) combined with relevant flow display instruments (such as XSF-40A, XSF-39A, B flow totalizers) can be used to measure the instantaneous flow rate or accumulated flow. It has found wide application in measuring and controlling systems for petroleum, chemical and metallurgy industries as well as scientific research ones. Two kinds of amplifiers, i.e. common and explosion-proof, are available.

		LZ Series Flow Meter LZ Flow Meter with variable area type metallic tube (hereafter called flow meter for short) is suitable for measuring flow rate of liquid, gas, and steam in the enclosed pipe. This flow meter is designed with several types. Besides on-site indication type (LZZ type), types of indication plus alarm(LZKtype) and indication together with output of standard current signals corresponding to relevant flow rate (LZDtype) are also available. The output of LZD type flow meter contains three kinds:i.e.two wire system with 4~20 mA output, three wire system with 0~10mA output, and four wire system with 0~20ma outut, and 4~20mA output.They can be either matched with various electric articulated uni instruments or combined with computer to form a network thus carrying out remote display, record, regulation, integration, and control.

		XIYI XM/XMG Smart Bar Graph Indicator XM, XMG Smart Bar graph Indicator can be mounted either vertically or horizontally and provide a dynamic analog visualization of any type of process parameter that can be transmitted to the indicator via process voltage or current input. It can be connected to themocouples, TRDs, temperature transmitter, pressure transmitter, Voltage and current signal etc. It can be used to indicate any of the process parameter: temperature, pressure, flow capacity, level. This type of bar graph indicator features automatic adjusting and Variable alarm mode.

		YF TBS Built-in display YF/TBS built-in display should be mounted in YF100 vortex flow-meter (integral type) or YFA11 vortex flow converter (remote type), it could carry out following functions: 1. Simultaneously displaying the momentary flow rate and accumulated flow. 2. Providing output of pulse signals or standard current signals. Besides, data protection in case of power failure, remote parameter setting, and LCD back light functions could also be provided. The features of this built-in display are stability, reliability, high accuracy, wide application, easy operating and maintenance.

		DK32 miniature Flow Meters Options: DK 32 with horizontal connections Valve in the top connection block A maximum of two adjustable limit switches (K1/K2),the set limitsare indicated on the scale. Connection of a differential pressure regulator is possible. DK 34 with vertical connections A maximum of two adjustable limit switches (K1/K2),the set limitsare indicated on the scale.