Submersible Pumps - Products - Mega Maketing International Link

	Submersible Pumps
		AQW Submersible Sewage Sump Pump 1. Wastewater treatment systems in high buildings, mines, industrial and municipal projects. 2. Drainage sewage relay and treatment in municipal environment protection systems. 3. Field drilling and mining. 4. Drainage in foodstuff, pharmacy and commercial systems. 5. Drainage in flood control and water plants. 6. Drainage in agricultural irrigation and so on.

		AS Submersible Sewage Pump This type of pumps is fit for transforming sewage with long fibers by especial lacerated structure. This structure may laminate and cut off fibers to let fibers passing successfully without installing strainer.

		BQW(BQX) Ex-Proof Submersible Mixed Flow Pump BQW(BQX) explosion proof submersible sewage pump is suitable for pumping sewage water in laneway and workaround of coal mine, and is used widely in flammable or explosive environment.It is according to GB3836.1.2 standard of explosion-proof. BQW is with lower-pump structure, the motor connects directly with pump, and it is with wide flowing impeller, especially used in pumping water standing in low spots with large solids. BQW has good characters of simple structure, long working age, and convenient to use.

		CP CPS Sumbersible Sewage Pump CP CPS pumps, are single-stage single suction vertical submersible pumps designed for pumping of municipal and industrial sewage, dejected or liquids containing fibers and scraps and so on, as well as for oil extraction, water treatment and field irrigation.

		ESP Submersible Oil Pump & System The oil submersible motor pump is a multi-staged centrifugal pump which is designed to lift a full range of volume of oil, water at a low operating cost with a low initial investment. The number of pump stages is determined by the required lift and desired volume. Each stage consists of a rotating impeller connected to the K-Monel drive shaft and a stationary diffuser directs the flow of the fluid. The impellers and diffusers are made of corrosion-resistant material to prolong useful lift. Impellers are of the so-called floating or balance type, or in the higher volume, larger units, the fixed type. The floating type impeller is the most commonly used because of the height trust bearing load associated with the fixed type impeller. Each of the above described pump design has its own advantage and field of applocations. When the seal section has not enough support, the floating type pump and the fixed type pump are stacked together to lessen the excessive down thrust force on the seal section.

		HQB SubmersibleMixed Flow Pump HQB series, are mixed flow vertical submersible pumps designed for applications of large capacity and higher head with wide range of water level fluctuations. Ideal for pumping of municipal and industrial clean water, sewage, rain water, sea water and so on, such as water supply and drainage in municipal, mine and power stations, agricultural irrigation and flood controls, water level regulation in shipyard docks etc..

		QJ Vertical Submersible Borehole Pump QJ Series are vertical multi-stage submersible pumps designed for pumping clean water from deep wells, rivers, reservoirs and mines etc., as well as applications in industrial water supply and agricultural irrigation projects..

		QJ Stainless Steel Submersible Borehole Pump PERFORMANCE RANGE Flow rate up to 33m3/h Dynamic head up to 300m

		QW Submersible Sewage Pump QW pumps, are single-stage single suction vertical submersible pumps designed for pumping of municipal and industrial sewage, dejecta or liquids containing fibers and scraps and so on, as well as for oil extraction, water treatment and field irrigation.

		QZ Submersible Axial Flow Pump QZ series, are axial flow vertical submersible pumps designed for large capacity and low head applications. Ideal for pumping of municipal and industrial clean water, sewage, rain water, sea water in a wide range of applications, such as water supply and drainage in municipal, mine and power stations, agricultural irrigation and flood controls, water level regulation in shipyard docks etc..

		SWQ Submersible Sand Sewage Motor pump SWQ submersible sand sewage motor pump is a kind of hydraulic mechanism which motor connects directly with pump. It is used for delivering liquid contained sand, coal cinder solid etc.. The pump can be mainly employed in clearing the mud in lake, river, sea and widening channel etc. it also can be applied to clear out sewage pool; in building site, steel works and power station etc. the pump adopts excellent material, advanced structure, and it is with wide flowing passage if strong delivery ability.The hydraulic parts are wear-resistant. The pump is yet completed with control unit.

		WQ submersible Sump Pump WQ pumps, are single-stage single suction stainless steel vertical submersible pumps designed for pumping of municipal and industrial sewage containing fibers and scraps and so on.